EZ Roller Spinner FAQs

• Roller Wheel mode allows the vehicle to be driven around a shop or parking lot, allowing mobility.
• Spinner Wheel mode allows vehicles with locked brakes or no power to be pushed or pulled freely by removing the bolts.

The EZ Roller-Spinner™ is compatible with a wide range of 4, 5, and 6-lug vehicles, depending on the model and hub configuration. Fitment should always be verified before use.

The EZ Roller can be ordered as a standalone product. In this configuration, the spinner ring is not installed. If you do not expect to move a car that is locked in park or that has lost power, the EZ Roller will meet your needs.

No. The EZ Roller-Spinner™ is not for road use and is intended only for controlled, low-speed environments.

RWD and FWD cars generally require two on either the front or back axles. For some vehicle brands, only 1 EZ Roller-Spinner is required. Examples are a Mercedes-Benz AWD or a BMW AWD, as the engineering was set up to unlock the brakes on all four axles. Other car brands may require two on the rear axles of their AWD vehicle. We recommend checking with the service department for the specific vehicle to determine how the axles will unlock so the car can be moved safely.

Thermoplastic Elastomers (TPE) are a class of copolymers that consist of materials with both thermoplastic and elastomeric properties. TPE materials offer advantages typically associated with both rubbery and plastic materials. In short, our tire has enough rubber to provide superior traction and the strength characteristics of our injection-molded plastic wheel.

Both wheels were manufactured to clear all brake calipers, including oversized Brembo calipers. Our fastening system uses a 60-degree cone seat, and in most cases the vehicle’s OEM nuts and bolts can securely fasten our universal wheel to the vehicle’s wheel hub. There are a few exceptions where a shorter bolt must be used to avoid damaging the vehicle’s hub. This is due to the difference in the alloy wheel’s offset.

EZ Roller-Spinner™ products are covered by a 2-year limited warranty from the original delivery date against manufacturing defects in materials and workmanship under normal, intended commercial use.

- Operating the EZ Roller-Spinner above the maximum permitted speed of 5 mph
- Improper or incorrect mounting on the vehicle
- Use outside of its intended application

The Spinner Ring is covered by a 1-year limited warranty. This warranty will be void if:
-The vehicle is driven while in Spinner mode
-The vehicle is dragged laterally while the Spinner Ring is installed

The EZ Roller-Spinner™ is designed solely for moving vehicles at low speed within a workshop, dealership, auction yard, or lot. Not for road use.

• Accessories or components not manufactured or supplied by the seller are excluded from this warranty.
• Damage resulting from abuse, modification, overloading, or normal wear and tear is not covered.
• All shipping and transportation costs related to warranty claims are the responsibility of the buyer.